Tuya WiFi Temperature Thermometer Humidity Hygrometer Detector Alarm Sensor Smart Life App Alert Home Thermostat Controller Remote Monitoring (A: Only Temperature)

Note: the device is only with temperature, no humidity
Built-in rechargeable battery: 3.7V 1100MA
Note: the backup battery switch located at circuit board. For the first time use, please remember to open the back cover, then switch on backup battery switch.
Battery standby time: about 6 hours in full charge
Alarm Indication: The digital tube number flashes
Pairing indication: Green indicator flashes
Detecting temperature: -40℃ to +120℃ ( -35℉ to -245℉)
Temperature accuracy: 0.5℃
Measurement deviation: ±1℃ ( ±2℉)
WIFI band: 2.4G ( not support 5G)
Buzzer alarm time: default 15 seconds uncontrollable
Control unit dimension: 90mm x 63mm x 25mm (3.54 x 2.48 x 0.98 inch)
Temperature sensor cable: 1 meter (39.37 inch)

Note: The control unit should be installed indoor, not waterproof, but the temperature sensor is waterproof, users can put the 1 meter cable for outdoor detection.

Package Dimensions ‏ : ‎ 5.12 x 4.13 x 2.76 inches
Date First Available ‏ : ‎ September 20, 2019
Manufacturer ‏ : ‎ Konlen Technology Limited
ASIN ‏ : ‎ B07Y5G6TVC

APP: Work with Tuya Smart or Smart Life App; Support 2.4G Wi-Fi/802.11/b/g/n connection, not support 5G.
Real-Time Supervision : you can check real time temperature from App anytime anywhere via internet network of 4G or WIFI, and the temperature unit is optional (Centigrade ℃ or Fahrenheit ℉ ). The history record data of temperature can be exported from App.
Set upper and Lower limit value of temperature alarm:For example : Set the temperature range ( 80.6~91.4 ℉ Fahrenheit) . When the temperature in house is within the temperature range , the detector will work normal . If the temperature is lower than 80.6 ℉ or higher than 91.4 ℉ centigrade degree , the app will push alarm alerts and the Buzzer will sound at the same time .
Centigrade ℃ and Fahrenheit ℉ Switchable: Please configure the device WIFI to Tuya Smart or Smart Life App first. After you configure WIFI successfully, please enter setting by clicking ” setting” icon on the main interface of App, then find the temp unit and click it, you will see the option ℃ or ℉. Please choose ℉, then the device and App temperature will be switched to be Fahrenheit. Choose ℃, it will switch back to Celsius degree.
Multi -User monitoring Supported : Can share the device to other users